PI5C3306LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5C3306 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3306LEX Overview
This is a relatively small item of digital switch that is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The basic configuration includes 8 terminations.To find signal switch's related components, a base part number of PI5C3306 may also be used.The multiplexer's system works with 5V voltage.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.A total of 8 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.There are 1 bits signal multiplexer provides.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 3μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 10Ohm.There are 2 elements used for the mux switch configuration.
PI5C3306LEX Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3306LEX Applications
There are a lot of Diodes Incorporated PI5C3306LEX Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- A robotic vehicle with the metal detector
- Microprocessor input/output systems
- Injectors
- Relay
- Analog to digital conversion
- Electronic circuits
- Frequency multiplexing system
- Electronics industry
- Logic circuits
