PI5C3309UEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3309 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 3:1 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 3 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6 ns |
| Family | CMOS |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3309UEX Overview
In order to conserve board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Tape & Reel (TR) is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Among its basic configurations are 8 terminations.There is a base part number 3309 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.Currently, it is configured with a 8 pin configuration.The mounting point is Surface Mount.The logic switch is a member of the family of CMOS.As a result, signal multiplexer provides a total of 3 bits.The power supply of 5V is provided for mux switch's normal operation.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.According to TAPE AND REEL, the switches is packaged.A resistance of 2 governs its operation.The device is specified to operate at the maximum supply voltage of 5.25V in accordance with its applicable specification.A minimum supply voltage of 4.75V is required to operate the digital swith.In the mux switch configuration, there are 1 elements.
PI5C3309UEX Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3309UEX Applications
There are a lot of Diodes Incorporated PI5C3309UEX Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Electronically controlled engine system
- Implementing boolean functions with multiple variables
- Speed synchronization of multiple motors in industries
- Data transfer
- Electronics industry
- PCIe
- Automatic Monitoring systems
- Decimal decoder
- Night vision cameras
