PI5C3384QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3384 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3384QE Overview
As a means of saving space, digital switch is provided in the 24-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.75V~5.25V voltage.It is designed with 24 terminations as part of its basic configuration.The base part number is 3384, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.Currently, it is configured with a 24 pin configuration.The mounting point is Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.The power supply of 5V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.2 ports are used for some other peripheral signal switchings to plug in.With a resistance of 10Ohm, it operates.
PI5C3384QE Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3384QE Applications
There are a lot of Diodes Incorporated PI5C3384QE Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Analog to digital conversion
- Microprocessor memory systems
- Analog, digital or video signal switching
- Video transmission
- Data demultiplexing
- Medical industry
- Frequency multiplexing system
- Data transfer
- CPU memory location identification
