PI5C3390QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3390 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 16:8 |
| Power Supplies | 5V |
| Power Dissipation | 500mW |
| Number of Bits | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 30μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 16 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 8 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3390QE Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 28-SSOP (0.154, 3.90mm Width).The package is packaged in the manner of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 4.75V~5.25V supply voltage provides digital controlled switch's superior flexibility for designers.There is a design for terminating 28 as part of its basic configuration.The base part number is 3390, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.Currently, it is configured with a 28 pin configuration.The mounting is in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 16 bits available.mux switch's normal operation requires the power supply of 5V.This is an the digital switch ic that is classified as Other Logic ICs.Not being affected by the external factors, consumes 30μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has 16 inputs.The resistance of the signal switching is 10Ohm.There are 8 output lines designed to serve as the source of the signal.A configuration element for the mux switch consists of 1 elements.
PI5C3390QE Features
Supplied in the 28-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
8 output lines
PI5C3390QE Applications
There are a lot of Diodes Incorporated PI5C3390QE Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Image transmission
- Data bus control
- D/A converters
- Robotic vehicles
- Combinational circuit
- Enabling different rows of memory depending on address in memory chips
- RF-based home automation system
- Memory system of computers
- Speed synchronization of multiple motors in industries
