PI5C34X245BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-FSOP (0.154, 3.90mm Width) |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Frequency Stability | 50 ppm |
| Base Part Number | 34X245 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 20.5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C34X245BE Overview
Due to the fact that it is provided in the 80-FSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is packaged in the manner of Tube.For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Among its basic features are 80 terminations.In addition, it also has a base part number of 34X245, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.As a result, GULL WING represents the end of the conductors.This supply type employs Single.There are 80 pins on it.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 32 bits in signal multiplexer.In order to maintain mux switch's normal operation, power is provided to 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 100nA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 10Ohm.
PI5C34X245BE Features
Supplied in the 80-FSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C34X245BE Applications
There are a lot of Diodes Incorporated PI5C34X245BE Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Electronic circuits
- Analog to digital conversion
- Microprocessor memory systems
- Code conversion
- Signal router
- High-performance memory systems
- Enabling block of memory depending on address in memory chips
- Memory system of computers
- Implementing boolean functions with multiple variables
