PI5C3861QE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3861 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3861QE Overview
Due to the lack of space on the board, digital switch is provided in the 24-SSOP (0.154, 3.90mm Width).Tube is the packaging method.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.A supply voltage of 4.75V~5.25V provides digital controlled switch's superior flexibility for designers.There is a design for terminating 24 as part of its basic configuration.The base part number is 3861, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.A conductor terminates at GULL WING.Single is employed as its supply type.The board has 24 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.In order for 5V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without the influence of external factors, it consumes 10μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.This signal switching operates at a resistance of 10Ohm.
PI5C3861QE Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3861QE Applications
There are a lot of Diodes Incorporated PI5C3861QE Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Data transfer
- Memory system of computers
- Recording transmission
- Analog to digital conversion
- CNC machines
- Communication system
- Data communication
- Telephone network
- Code converters
