PI5C3861QEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI5C3861 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI5C3861QEX Overview
As a means of saving space, digital switch is provided in the 24-SSOP (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.There are 24 terminations included in its basic configuration.The base part number is PI5C3861, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.It is configured with 24 pins.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 10 bits available.In order for 5V to operate normally, a power supply is provided.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 10μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.A resistance of 10Ohm is used to operate it.
PI5C3861QEX Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
PI5C3861QEX Applications
There are a lot of Diodes Incorporated PI5C3861QEX Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Electronically controlled engine system
- Metal detectors
- Transmission from the computer system of a satellite
- Decimal decoder
- Relay
- Signal router
- Analog to digital conversion
- Memory system of computers
- Code conversion
