PI5PD2065UEEX

N-Channel PMIC PI5PD2065 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Diodes Incorporated
Nocochips NO: 233-PI5PD2065UEEX
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 411
Description: N-Channel PMIC PI5PD2065 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Supplier Device Package	8-MSOP-EP
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Base Part Number	PI5PD2065
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1.5A
Interface	On/Off
Current - Output (Max)	1.5A
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	USB Switch
Ratio - Input:Output	1:1
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ)	70mOhm
RoHS Status	ROHS3 Compliant

PI5PD2065UEEX Overview

It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A Surface Mount mounting is used for the LED driving board.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.This object belongs to the PI5PD2065 family.8 pins are used for operation.In terms of output, the lighting driver can provide a maximum of 1.5A V.This results in the maximum output current dropping to 1.5A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.A maximum operating temperature of 125°C°C is required for stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.