PI6C2405A-1HLEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Zero Delay Buffer |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI6C2405 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 133MHz |
| Family | 6C |
| Input | TTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.3 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Number of True Outputs | 5 |
| Length | 4.45mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI6C2405A-1HLEX Overview
Tape & Reel (TR)-method packaging is used for clock ICs. 8-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 8 terminations in this file. This clock generator ic should receive a voltage of 3.3V. There is a Clock PLL called TTL which is designed to be the input to this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. 133MHz is the maximal value for normal operation. This component can be conveniently installed on the panel thanks to the Surface Mount. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage (Vsup) should be kept above 3V for normal operation. There are 3V~3.6V available for use with this clock PLL. Based on test statistics, ambient temperature should be set at 0°C~70°C. This electronic component can be classified as a Zero Delay Buffer. This part number PI6C2405 is related to the following electrical components. There are 8 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that clock generator can handle. The device is usually classified as a type of Clock Drivers device. This clock generator offers low timing skew at 0.2 ns Max. There are 5 pins configured for enabling high true outputs on this clock generator. By searching for parts that belong to the 6C family, you can find electronic parts that are similar.
PI6C2405A-1HLEX Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs
PI6C2405A-1HLEX Applications
There are a lot of Diodes Incorporated PI6C2405A-1HLEX Clock Generators applications.
- Bluetooth receivers
- Instrument
- Wireless handsets
- Coherent detection of the signal
- 10 Gigabit Ethernet
- Signal analyzer
- Integrated phase noise in aerospace systems
- Deep space exploration
- Medical equipment
- Reference signals to RF systems
