PI6C2405A-1HWE
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI6C2405 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 54mA |
| Frequency (Max) | 133MHz |
| Family | 6C |
| Input | TTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.3 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Zero Delay Buffer |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
PI6C2405A-1HWE Overview
As a clock IC, it uses the Tube package. The 8-SOIC (0.154, 3.90mm Width) package includes this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 8 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be TTL. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. This frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. This electronic component can be classified as a Zero Delay Buffer. Related electrical parts can be found for the base part number PI6C2405. There is an available 8 pin on the clock generators. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. A Clock Drivers clock generator is essentially what this device is. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. At 0.2 ns Max, this clock generator offers low timing skew. When searching for electrical components belonging to the 6C family, similar parts can be found.
PI6C2405A-1HWE Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
PI6C2405A-1HWE Applications
There are a lot of Diodes Incorporated PI6C2405A-1HWE Clock Generators applications.
- HDD recorders
- Digital switching systems
- Reference signals to RF systems
- Microwave point-to-point systems
- Line cards used in telephone exchange
- 10 Gigabit Ethernet
- Clock recovery
- Coherent detection of the signal
- Bit synchronization
- FPGA and processor clocks
