Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Zero Delay Buffer |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
PI6C2405 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
54mA |
Frequency (Max) |
133MHz |
Family |
6C |
Input |
TTL |
Ratio - Input:Output |
1:5 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.3 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Number of True Outputs |
5 |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PI6C2405A-1HWEX Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 8 terminations found in this file. The clock generator ic should be grounded with a voltage of 3.3V. A clock generator's input is called TTL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 133MHz is available. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIt is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. This electronic component is usually classified as a Zero Delay Buffer component. This part number PI6C2405 is related to the following electrical components. There is an available 8 pin on the clock generators. The maximum supply voltage that analog clock generator can handle is 3.3V. As such, it is often referred to as a kind of Clock Drivers clock PLL. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. This digital clock generator is configured with 5 high true output enable pins. When searching for parts of the 6C family, similar frequency generators will be found.
PI6C2405A-1HWEX Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs
PI6C2405A-1HWEX Applications
There are a lot of Diodes Incorporated PI6C2405A-1HWEX Clock Generators applications.
- Ultrasound diagnosis
- Reference signals to RF systems
- Cell phones
- Time to digital converters
- HDD recorders
- Ports
- Line cards used in telephone exchange
- Radiotelephones
- Fiber Channel
- Computers to manage memory cards