banner_page

PI6C2405A-1LE

3.3V Zero Delay Buffer 133MHz PI6C2405 Clock Generators 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-PI6C2405A-1LE
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 686
  • Description: 3.3V Zero Delay Buffer 133MHz PI6C2405 Clock Generators 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2010
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number PI6C2405
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 54mA
Frequency (Max) 133MHz
Family 6C
Input TTL
Ratio - Input:Output 1:5
PLL Yes
Differential - Input:Output No/No
Propagation Delay (tpd) 0.3 ns
Same Edge Skew-Max (tskwd) 0.2 ns
Number of True Outputs 5
Length 4.45mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PI6C2405A-1LE Overview


As a clock IC, it uses the Tube package. The 8-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. 8 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by TTL as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. 133MHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIt is safe to use this frequency synthesizer with a supply voltage above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. Zero Delay Buffer is the type of electrical part that this component is classified as. The related electrical components for the base part number PI6C2405 can be found below. Clock generator is designed with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. As a result, it is commonly classified as a type of Clock Drivers clock PLL. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. The clock generator is configured with 5 pins for enabling true outputs. By searching for the 6C family, it is possible to find similar electrical components.

PI6C2405A-1LE Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs

PI6C2405A-1LE Applications


There are a lot of Diodes Incorporated PI6C2405A-1LE Clock Generators applications.

  • Communication infrastructure
  • CPUs
  • High-speed communication applications
  • Frequency shifting decodes
  • Frequency Modulation (FM) stereo decoders
  • Frequency synthesis
  • Signal frequency synthesis circuits
  • Local oscillator source in receiver
  • Ports
  • Signal generator

Write a review

Note: HTML is not translated!
    Bad           Good