PIC10F202-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 4MHz |
| Base Part Number | PIC10F202 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 3 |
| Nominal Supply Current | 175μA |
| RAM Size | 24 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| Density | 6 kb |
| ROM (words) | 512 |
| CPU Family | PIC |
| Number of Programmable I/O | 4 |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC10F202-I/P Overview
Due to its space-saving qualities, it is available in the 8-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. You can find it in the package of Tube. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. A total of 3 I/Os are available on this device. Other components that are comparable to it have the base part number PIC10F202. The terminals of this device are set to DUAL. This circuit consists of 8 terminationals. This electrical component is part of the PIC? 10F series. The 5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 8 pins are used to construct it. It is mounted based on the method of Through Hole. There are 8 pins on it. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 768B which may be used to store programs and data. A 2.5/5V power source powers it. Using a frequency of 4MHz, it is very efficient. In total, there are 1 timers and counters. PIC CPUs are included in this part. 4 is the number of programmable I/O. Vsup should be kept above 2V for normal operation. An oscillator type Internal is required for it to work.
PIC10F202-I/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC10F202-I/P Applications
There are a lot of Microchip Technology PIC10F202-I/P Microcontroller applications.
- Computed Tomography (CT scan)
- Information appliances (networking of household appliances)
- Speed meter
- Television
- Ipod
- Sonography (Ultrasound imaging)
- Oil and gas
- Leakage current tester
- Refrigerators
- Industrial instrumentation devices
