PIC10F202T-I/MC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC10F202 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 3 |
| RAM Size | 24 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Density | 6 kb |
| ROM (words) | 512 |
| CPU Family | PIC |
| Number of Programmable I/O | 4 |
| Height | 950μm |
| Length | 2mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC10F202T-I/MC Overview
Due to the benefits of saving space, it is available in the 8-VFDFN Exposed Pad package. Using Surface Mount, it is mounted. You can find it in the package of Tape & Reel (TR). It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. There are 3 I/Os on it. In order to find similar components, it has a base part number of PIC10F202. DUAL is the location of its terminals. It has 8 terminationals. In the PIC? 10F series, this electrical component is found. Using the 5V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 6 pins are required to construct this device. Based on the Surface Mount method, it is mounted. In total, it has 8 pins. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 768B which may be used to store programs and data. A 2.5/5V source of power is being used to run it. At a frequency of 4MHz, it exhibits excellent efficiency. It appears that there are 1 timers/counters in use. It belongs to the PIC CPU family. The number of programmable inputs and outputs is 4. During normal operation, the supply voltage (Vsup) should be kept above 2V. An oscillator type Internal is required for it to work.
PIC10F202T-I/MC Features
8-VFDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC10F202T-I/MC Applications
There are a lot of Microchip Technology PIC10F202T-I/MC Microcontroller applications.
- Switches
- Blenders
- Accu-check
- Binding machines
- Ipod
- Embedded gateways
- Smartphone
- Hearing aids
- Data acquisition and control
- Scanners
