PIC10F206-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 4MHz |
| Base Part Number | PIC10F206 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 3 |
| RAM Size | 24 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Number of Programmable I/O | 4 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
PIC10F206-E/P Overview
As a result, it is available in the 8-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. It comes in a Tube package. Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. There are 3 I/Os on the board. It has a base part number of PIC10F206 that can be used to find other components that are comparable. DUAL is the location of its terminals. Currently, it consists of 8 terminationals. It is a member of the PIC? 10F series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 8 pins are required to construct this device. The mounting of this device is carried out following the method of Through Hole. A total of 8 pins are attached to it. It belongs to the subcategory Microcontrollers. The devices have a maximum memory size of 768B that can be used to store programs and data. Powered by a 2.5/5V source. It performs extremely well at a frequency of 4MHz. 1 counters/timers are currently active. This part is part of the PIC family of CPUs. There are 4 programmable I/Os in the device. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. Internal is the oscillator type it uses.
PIC10F206-E/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC10F206-E/P Applications
There are a lot of Microchip Technology PIC10F206-E/P Microcontroller applications.
- Hard drives
- Hearing aids
- Paper shredders
- Oscilloscopes
- Missile control
- Guidance-GPS
- Digital TVs
- X-ray
- Glucose monitoring systems (for Type 1 Diabetes)
- Telephone sets
