PIC10F220-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Base Part Number | PIC10F220 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | USB |
| Memory Size | 384B |
| Oscillator Type | Internal |
| Number of I/O | 4 |
| RAM Size | 16 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 384B 256 x 12 |
| Bit Size | 8 |
| Data Converter | A/D 2x8b |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 256 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC10F220-E/P Overview
As a result, it is available in the 8-DIP (0.300, 7.62mm) package. Mounted using Through Hole. Tube is the package that contains it. It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~125°C TA. FLASH is the type of program memory used by it. A total of 4 I/Os are available on this device. Based on the PIC10F220 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. A 8 termination is contained within it. An electrical component such as this is included in the series PIC? 10F. It is possible to achieve high efficiency with a 3V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 8 pins are used to construct it. The mounting of this device is carried out following the method of Through Hole. There are 8 pins on it. This component is a part of Microcontrollers. In the device, there is a memory capacity of 384B which may be used to store programs and data. It is powered by a 2.5/5V?source. At a frequency of 8MHz, it exhibits excellent efficiency. 1 timer/counters are present. It belongs to the PIC CPU family. Vsup should be kept above 2.5V for normal operation. Using a Internal oscillator type, it works well.
PIC10F220-E/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC10F220-E/P Applications
There are a lot of Microchip Technology PIC10F220-E/P Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Petrochemical
- Smartphone
- Toasters
- Fire detection & safety devices
- Firewalls
- Printers
- Sonography (Ultrasound imaging)
- Automatic control
- Instrument control
