PIC10F220T-I/OT
| Parameters | |
|---|---|
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 384B 256 x 12 |
| Bit Size | 8 |
| Data Converter | A/D 2x8b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Address Bus Width | 8b |
| Density | 3 kb |
| ROM (words) | 256 |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 2 |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC10F220 |
| Pin Count | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 384B |
| Oscillator Type | Internal |
| Number of I/O | 4 |
| Nominal Supply Current | 175μA |
| RAM Size | 16 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
PIC10F220T-I/OT Overview
A space-saving advantage is that it is included in the SOT-23-6 package. Mounted using Surface Mount. Package Tape & Reel (TR) contains it. A PIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is its program memory type. There are 4 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number PIC10F220. The position of the device is DUAL at terminal. 6 terminations are present in it. The electrical component is part of the series PIC? 10F. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. For its construction, 6 pins are used. The mounting of this device is carried out following the method of Surface Mount. 6 pins are on it in total. In the device, there is a memory capacity of 384B which may be used to store programs and data. The system is highly efficient when working at a frequency of 8MHz. In order to maintain normal operation, Vsup must be above 2V. Using an oscillator type of Internal, it works.
PIC10F220T-I/OT Features
SOT-23-6 package
Mounting type of Surface Mount
PIC10F220T-I/OT Applications
There are a lot of Microchip Technology PIC10F220T-I/OT Microcontroller applications.
- Food and beverage
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Oscilloscopes
- Gas monitoring systems
- Oil and gas
- Information appliances (networking of household appliances)
- Hearing aids
- Heater/Fan
- DCS control intelligent sensor
- Current meter
