PIC10F222T-I/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 10F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC10F222 |
| Pin Count | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 4 |
| Nominal Supply Current | 175μA |
| RAM Size | 23 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Data Converter | A/D 2x8b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Address Bus Width | 8b |
| ROM (words) | 512 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 2 |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC10F222T-I/OT Overview
For the purpose of saving space, it is available in the SOT-23-6 package. This is mounted using the Surface Mount method. Package Tape & Reel (TR) contains it. A core processor of PIC is present in the device. When working, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 4 I/Os on it. Other components that are comparable to it have the base part number PIC10F222. At DUAL, it has its terminals. As far as terminations are concerned, there are 6 terminations present. This electrical component is part of the PIC? 10F series. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. 6 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. There are a total of 6 pins on it. Microcontrollers contains this component. Memory size for the devices is 768B, which can be used to store programs and data. Using a frequency of 8MHz, it is very efficient. It is a member of the PIC family of CPUs. Normally, the supply voltage (Vsup) should remain above 2V. Internal is the oscillator type it uses.
PIC10F222T-I/OT Features
SOT-23-6 package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC10F222T-I/OT Applications
There are a lot of Microchip Technology PIC10F222T-I/OT Microcontroller applications.
- Electronic jamming systems
- Torpedo guidance
- Process control devices
- Teletext terminals
- Walkie talkies
- Mobile computers
- Instrument control
- Television
- Calculators
- Set-top boxes
