PIC12F1571-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F1571 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| Nominal Supply Current | 30μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Max Frequency | 32MHz |
| Number of ADC Channels | 4 |
| Number of PWM Channels | 3 |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12F1571-I/MS Overview
For space savings, it is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. Using Surface Mount, it is mounted. Package Tube contains it. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. 6 I/Os are present on the device. Based on its base part number of PIC12F1571, other similarly-sized components can be found. DUAL is the position of its terminals on the board. In this case, there are 8 terminationals. Part of the PIC? 12F series, this electrical component is used in a variety of applications. Because of the 3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. There are 8 pins used in the construction of this device. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 1.8kB. A 2.5/5V power source powers it. A total of 6 timers/counters have been set up. A maximum frequency of 32MHz is used by the device. PIC CPUs are included in this part. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. The oscillator type Internal is used to operate the device.
PIC12F1571-I/MS Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F1571-I/MS Applications
There are a lot of Microchip Technology PIC12F1571-I/MS Microcontroller applications.
- Electromechanical control
- Hard drives
- Embedded gateways
- Fax machines
- Equipment control
- Leakage current tester
- PDAs, game consoles
- Electrocardiogram (EKG)
- Digital TVs
- Fabric
