PIC12F1572-I/P
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC12F1572 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | LIN, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| Nominal Supply Current | 30μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | LINbus, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 4x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of ADC Channels | 4 |
| Number of PWM Channels | 3 |
| Number of USB Channels | 1 |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
PIC12F1572-I/P Overview
There is a 8-DIP (0.300, 7.62mm) package available to save space. Through Hole is the way to mount it. In the package Tube, it is included. There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. There are 6 I/Os on the board. It has a part number of PIC12F1572 that can be used to locate similar components. At DUAL, its terminals are located. 8 terminationals are present. It is a member of the PIC? 12F series of electrical components. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 8 pins are required to construct this device. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. A 2.5/5V source of power is being used to run it. When working at a frequency of 32MHz it is able to achieve excellent efficiency. There are currently 6 timers/counters set up on the system. The part is a part of the PIC CPU family. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.5V. An oscillator of type Internal is used.
PIC12F1572-I/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC12F1572-I/P Applications
There are a lot of Microchip Technology PIC12F1572-I/P Microcontroller applications.
- Industrial instrumentation devices
- Industrial robot
- Laminators
- DCS control intelligent sensor
- DDC control
- Ipod
- Accu-check
- Scanners
- Telephone sets
- Volt meter
