PIC12F1840-I/MF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F1840 |
| Pin Count | 8 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| Nominal Supply Current | 34μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 4x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 256 |
| Number of ADC Channels | 4 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| Number of PWM Channels | 1 |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 12F |
| JESD-609 Code | e3 |
| Part Status | Active |
PIC12F1840-I/MF Overview
As a result, it is available in the 8-VDFN Exposed Pad package. Using Surface Mount, it is mounted. It comes in the package?of a Tube. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 5 I/Os are present on the device. A comparable component can be found by using the base part number PIC12F1840. DUAL is the location of its terminals. This circuit consists of 8 terminationals. PIC? XLP? 12F is the series number of this electrical component. The supply voltage of 3V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 8 pins are required to construct this device. In total, it has 8 pins. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It performs extremely well at a frequency of 32MHz. The number of timers and counters is 3. The oscillator type Internal is used to operate the device.
PIC12F1840-I/MF Features
8-VDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F1840-I/MF Applications
There are a lot of Microchip Technology PIC12F1840-I/MF Microcontroller applications.
- Microwave ovens
- Process control devices
- Laminators
- Industrial robot
- Dryers
- Multi-meter
- Volt meter
- Process control devices
- Toasters
- Medical instruments chromatographs
