PIC12F508T-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F508 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 3V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | RS-232, USB |
| Memory Size | 768B |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 25 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Number of Programmable I/O | 6 |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
PIC12F508T-I/MS Overview
Due to the benefits of saving space, it is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The way of Surface Mount is used to mount it. This item can be found in package Tape & Reel (TR). The device has a PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. It has a number of 5I/Os. A component with the same part number as PIC12F508 can be compared to other similar components. The terminals of this device are set to DUAL. There are a total of 8 terminations in it. The electrical component is part of the series PIC? 12F. Because the supply voltage is 2.5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 8 pins are used to construct it. Based on the Surface Mount method, it is mounted. A total of 8 pins are attached to it. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 768B. This device achieves excellent efficiency at frequencies of 4MHz. 1 timer/counters are present. This part is an integral part of the PIC CPU family. 6 is the number of programmable I/O. Normally, the supply voltage (Vsup) should remain above 2V. Using an oscillator type of Internal, it works.
PIC12F508T-I/MS Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F508T-I/MS Applications
There are a lot of Microchip Technology PIC12F508T-I/MS Microcontroller applications.
- Ipad
- Electromechanical control
- Process control devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Smoke alarms
- Binding machines
- Xbox
- Wastewater treatment
- Hearing aids
- Teletext terminals
