PIC12F675-E/SN
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F675 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| Nominal Supply Current | 175μA |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Number of Timers/Counters | 2 |
| Address Bus Width | 8b |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 6 |
| Number of ADC Channels | 4 |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
PIC12F675-E/SN Overview
For the purpose of saving space, it is available in the 8-SOIC (0.154, 3.90mm Width) package. A Surface Mount mounting method is used. It comes in the package?of a Tube. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. There is FLASH program memory in it. A total of 5 I/Os are present. Based on the PIC12F675 base part number, it can be compared with other components. At DUAL, its terminals are located. There are a total of 8 terminations in it. In the PIC? 12F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 8 pins are used in its construction. A method of mounting is used, which is Surface Mount. It is equipped with 8 pins in total. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. A 5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 20MHz. 2 timer/counters are present. It is part of the PIC CPU family. There are a total of 6 programmable I/Os available. Using a Internal oscillator type, it works well.
PIC12F675-E/SN Features
8-SOIC (0.154, 3.90mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F675-E/SN Applications
There are a lot of Microchip Technology PIC12F675-E/SN Microcontroller applications.
- Blood pressure monitors
- Electrocardiogram (EKG)
- Electronic jamming systems
- Digital TVs
- Traditional industrial transformation
- Leakage current tester
- Heart rate monitors
- Accu-check
- Keyboards
- Firewalls
