PIC12F683-E/MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F683 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Interface | RS-232, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 6 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12F683-E/MD Overview
As a result, it is available in the 8-VDFN Exposed Pad package. Surface Mount is the way to mount it. It is available in the Tube package. A PIC core processor powers the device. Work should be performed at a temperature of -40°C~125°C TA. Its type of program memory is FLASH. 5 I/Os have been provided by the device. Other components that are comparable to it have the base part number PIC12F683. The position of the device is DUAL at terminal. It has 8 terminationals. This electrical component is part of the PIC? 12F series. By using a 5V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 8 pins are used in its construction. The method of Surface Mount is used to mount it. In total, it has 8 pins. The component is included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are 3 timers/counters. It is a member of the PIC family of CPUs. The number 6 represents the number of programmable I/O ports on the board. Using oscillator type Internal makes it work.
PIC12F683-E/MD Features
8-VDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F683-E/MD Applications
There are a lot of Microchip Technology PIC12F683-E/MD Microcontroller applications.
- Set-top boxes
- Mice
- Food and beverage
- Smart instruments
- Torpedo guidance
- Television
- Digital TVs
- Equipment control
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Accu-check
