PIC12F683T-I/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12F683 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Interface | RS-232, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 6 |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12F683T-I/MF Overview
There is an option to purchase it in the 8-VDFN Exposed Pad package, which saves space. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tape & Reel (TR). The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 5 I/Os on it. A component with the same part number as PIC12F683 can be compared to other similar components. The terminals of this device are located at DUAL. 8 terminations are present in it. In the PIC? 12F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 8 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. 8 pins are on it in total. This component is a part of Microcontrollers. Memory size for the devices is 3.5kB, which can be used to store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. There are 3 timers/counters. It is a member of the PIC family of CPUs. There are a total of 6 programmable I/Os available. The oscillator type Internal is used to operate the device.
PIC12F683T-I/MF Features
8-VDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12F683T-I/MF Applications
There are a lot of Microchip Technology PIC12F683T-I/MF Microcontroller applications.
- Refrigerators
- Walkie talkies
- X-ray
- Set-top boxes
- Vacuum cleaners
- Fire detection & safety devices
- Digital TVs
- Automatic control
- Tape drives
- Hard drives
