PIC12HV609-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 12F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Frequency | 20MHz |
| Base Part Number | PIC12HV609 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 5 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Supply Current-Max | 3.4mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Density | 14 kb |
| CPU Family | PIC |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12HV609-I/P Overview
As a result, it is available in the 8-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It is available in the Tube package. The device has a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is the type of program memory used by it. A total of 5 I/Os are present. A component with the same part number as PIC12HV609 can be compared to other similar components. DUAL is the position of its terminals on the board. This circuit consists of 8 terminationals. Part of the PIC? 12F series, this electrical component is used in a variety of applications. Because the supply voltage is 4.5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 8 pins. Based on the Through Hole method, it is mounted. It is equipped with 8 pins in total. In Microcontrollers, this component is included. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. It is important to note that the maximum supply current is 3.4mA. At a frequency of 20MHz, it exhibits excellent efficiency. In total, there are 2 timers and counters. This part is an integral part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 4V. Using oscillator type Internal makes it work.
PIC12HV609-I/P Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC12HV609-I/P Applications
There are a lot of Microchip Technology PIC12HV609-I/P Microcontroller applications.
- Switches
- Nintendo
- Walkie talkies
- Data acquisition and control
- Refrigerators
- Auto-breaking system
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Heart rate monitors
- Telephone sets
- Fax machines
