PIC12LF1822T-I/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® XLP™ 12F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC12LF1822 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 4x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 8 |
| Low Power Mode | YES |
| Number of Programmable I/O | 5 |
| RAM (words) | 128 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC12LF1822T-I/MF Overview
Due to the benefits of saving space, it is available in the 8-VDFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in a Tape & Reel (TR) package. It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 6 I/Os on it. Based on the PIC12LF1822 base part number, it can be compared with other components. The terminals of this device are located at DUAL. This circuit consists of 8 terminationals. PIC? XLP? 12F is the series number of this electrical component. As a result of the 3V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is constructed from 8 pins. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. Using a frequency of 32MHz, it is very efficient. A total of 3 timers/counters have been set up. A chip with 5 programmable inputs/outputs is available. Using an oscillator type of Internal, it works.
PIC12LF1822T-I/MF Features
8-VDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC12LF1822T-I/MF Applications
There are a lot of Microchip Technology PIC12LF1822T-I/MF Microcontroller applications.
- Current meter
- Ipad
- Aerospace navigation systems
- Answering machines
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Walkie talkies
- Oil and gas
- Gas monitoring systems
- Electromechanical control
- X-ray
