PIC16C54C-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C54C |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/6.25V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 768B |
| Oscillator Type | External |
| Number of I/O | 12 |
| Nominal Supply Current | 2mA |
| RAM Size | 25 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| ROM (words) | 512 |
| CPU Family | PIC |
| Height | 3.68mm |
| Length | 22.9mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C54C-20I/P Overview
Due to its space-saving qualities, it is available in the 18-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It comes in the package?of a Tube. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. OTP is the type of program memory used by it. A total of 12 I/Os are available on this device. A component with the same part number as PIC16C54C can be compared to other similar components. At DUAL, it has its terminals. A 18 termination is contained within it. An electrical component such as this is included in the series PIC? 16C. Using the 5V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. 18 pins are used to construct it. This device has a total of 18 pins. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 768B. A 2.5/6.25V source of power is being used to run it. Working at a frequency of 20MHz results in excellent efficiency. It appears that there are 1 timers/counters in use. PIC CPUs are included in this part. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. An oscillator type External is required for it to work.
PIC16C54C-20I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C54C-20I/P Applications
There are a lot of Microchip Technology PIC16C54C-20I/P Microcontroller applications.
- Scanners
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Set-top boxes
- Temperature sensing and controlling devices
- Leakage current tester
- Auto-breaking system
- Digital TVs
- DCS control intelligent sensor
- 3D printers
- Missile control
