PIC16C56A-20/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C56A |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Memory Size | 1kB |
| Oscillator Type | External |
| Number of I/O | 12 |
| Nominal Supply Current | 2mA |
| RAM Size | 25 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 1.5KB 1K x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC16C56A-20/SO Overview
It is available in the 18-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. This is mounted using the Surface Mount method. This item can be found in package Tube. A core processor of PIC is present in the device. When working, the temperature should be kept at 0°C~70°C TA. Its type of program memory is OTP. 12 I/Os have been provided by the device. Other components that are comparable to it have the base part number PIC16C56A. The terminals are positioned at DUAL. 18 terminationals are present. This electrical component is part of the PIC? 16C series. The 5V supply voltage enables high efficiency. As far as data storage is concerned, EPROM, OTP is used as the memory type. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A number of 18 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. A total of 18 pins are attached to it. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 1kB. There is 5V power source in this device. Using a frequency of 20MHz, it is very efficient. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. In total, there are 1 timers and counters. PIC CPUs are included in this part. Using oscillator type External makes it work.
PIC16C56A-20/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C56A-20/SO Applications
There are a lot of Microchip Technology PIC16C56A-20/SO Microcontroller applications.
- Electrocardiogram (EKG)
- Virtual reality VR robots
- Torpedo guidance
- Automatic control
- Guidance-GPS
- Petrochemical
- Graphic terminals
- Teletext terminals
- Safety -airbags, automatic braking system (ABS)
- Measuring revolving objects
