PIC16C57-LP/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | PIC® 16C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40kHz |
| Base Part Number | PIC16C57 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 6.25V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | RS-232 |
| Memory Size | 3kB |
| Oscillator Type | External |
| Number of I/O | 20 |
| Speed | 40 MHz |
| RAM Size | 72 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~6.25V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3KB 2K x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 40 ms |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| RAM (words) | 72 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 4.83mm |
| Length | 36.32mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C57-LP/P Overview
As a result, it is available in the 28-DIP (0.600, 15.24mm) package. It is mounted using the way of Through Hole. It comes in the package?of a Tube. There is a PIC as core processor in this device. Work should be performed at a temperature of 0°C~70°C TA. The type of memory in which this program is stored is OTP. 20 I/Os have been provided by the device. Based on the PIC16C57 base part number, it can be compared with other components. The terminals of this device are set to DUAL. There are a total of 28 terminations in it. This electrical component is part of the PIC? 16C series. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 28 pins are used to construct it. It has a total of 28 pins on it. It is possible to store programs and data on the devices, as they have a memory size of 3kB. Working at a frequency of 40kHz results in excellent efficiency. 1 counters/timers are currently active. Normally, the supply voltage (Vsup) should remain above 2.5V. Using an oscillator type External, it operates.
PIC16C57-LP/P Features
28-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
PIC16C57-LP/P Applications
There are a lot of Microchip Technology PIC16C57-LP/P Microcontroller applications.
- Calculators
- Auto-breaking system
- Hand-held metering systems
- Microwave ovens
- Copiers
- Process control devices
- Automatic control
- Aerospace navigation systems
- Projector
- Oil and gas
