PIC16C57-XTI/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | PIC16C57 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 6.25V |
| Power Supplies | 3/6.25V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | RS-232 |
| Memory Size | 3kB |
| Oscillator Type | External |
| Number of I/O | 20 |
| RAM Size | 72 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~6.25V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3KB 2K x 12 |
| Supply Current-Max | 3.3mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| CPU Family | PIC |
| Height Seated (Max) | 4.06mm |
| Length | 34.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C57-XTI/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. A Through Hole mounting method is used. In the package Tube, it is included. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. OTP is its program memory type. It has a number of 20I/Os. Based on its base part number of PIC16C57, other similarly-sized components can be found. DUAL is the position of its terminals on the board. It consists of 28 terminationals. PIC? 16C is the series number of this electrical component. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. 28 pins are on it in total. It is one of the components included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 3kB. It is important to note that the maximum supply current is 3.3mA. Power is provided by a 3/6.25V source. When working at a frequency of 4MHz it is able to achieve excellent efficiency. 1 counters/timers are currently active. The part is a part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 3V. An oscillator type External is required for it to work.
PIC16C57-XTI/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C57-XTI/SP Applications
There are a lot of Microchip Technology PIC16C57-XTI/SP Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Paper shredders
- Robots
- Electromechanical control
- DCS control intelligent sensor
- Industrial instrumentation devices
- Hand-held metering systems
- Equipment control
- Heart rate monitors
- Automatic control
