PIC16C620A-20/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C620A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 896B |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 96 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 896B 512 x 14 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.32mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C620A-20/P Overview
For space savings, it is available in the 18-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. Tube is the package that contains it. A core processor of PIC is present in the device. Work should be done at 0°C~70°C TA. Memory type OTP is used for program memory. 13 I/Os have been provided by the device. To find equivalent components, use its PIC16C620A base part number. This device has terminals at DUAL. 18 terminations are present in it. In the PIC? 16C series, this electrical component is found. As a result of the 5V supply voltage, high efficiency is possible. As far as data storage is concerned, EPROM is used as the memory type. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 18 pins are used in its construction. It is mounted based on the method of Through Hole. Total number of pins is 18. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 896B which may be used to store programs and data. The maximum supply current is set at 7mA. Powered by a 3.3/5V source. This device achieves excellent efficiency at frequencies of 20MHz. There are 1 timers/counters. This part is an integral part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The oscillator type External is used to operate the device.
PIC16C620A-20/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C620A-20/P Applications
There are a lot of Microchip Technology PIC16C620A-20/P Microcontroller applications.
- Smartphone
- Telephone sets
- Digital cameras
- Microwave ovens
- Vacuum cleaners
- Hard drives
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Electronic jamming systems
- Mobile computers
- Digital TVs
