PIC16C621A-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C621A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 1.8kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 96 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C621A-20I/SO Overview
A space-saving advantage is that it is included in the 18-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. A package of Tube contains it. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. OTP has been assigned to it as a program memory. A total of 13 I/Os are present. Other components that are comparable to it have the base part number PIC16C621A. DUAL is the position of its terminals on the board. In this case, there are 18 terminationals. This electrical component is part of the PIC? 16C series. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. Memory type EPROM is used for data storage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is constructed from 18 pins. A method of mounting is used, which is Surface Mount. It has a total of 18 pins on it. In Microcontrollers, this component is included. The devices have a maximum memory size of 1.8kB that can be used to store programs and data. It is important to note that the maximum supply current is 7mA. It is powered by a 3.3/5V?source. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. It appears that there are 1 timers/counters in use. It belongs to the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. It works with an oscillator type External.
PIC16C621A-20I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C621A-20I/SO Applications
There are a lot of Microchip Technology PIC16C621A-20I/SO Microcontroller applications.
- Current meter
- Speed meter
- Toasters
- Computed Tomography (CT scan)
- Volt meter
- Microwave ovens
- Smart highways (navigation, traffic control, information monitoring and car service)
- DDC control
- Routers
- Industrial instrumentation devices
