PIC16C622A-20/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C622A |
| Pin Count | 20 |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 128 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C622A-20/SS Overview
As a result, it is available in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. It is available in the Tube package. A core processor of PIC is present in the device. It is important to keep the temperature at 0°C~70°C TA while working. OTP has been assigned to it as a program memory. A total of 13 I/Os are present. It has a base part number of PIC16C622A that can be used to find other components that are comparable. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 20 terminations present. This electrical component is part of the PIC? 16C series. As a result of the 5V supply voltage, high efficiency is possible. As far as data storage is concerned, EPROM, OTP is used as the memory type. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed using 20 pins. This mount is done in accordance with the method of Surface Mount. 20 pins are on it in total. In Microcontrollers, this component is included. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. The maximum supply current is 7mA. Power is provided by a 3.3/5V source. Working at a frequency of 20MHz results in excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5.5V in their designs. The number of timers and counters is 1. PIC CPUs are included in this part. External is the oscillator type it uses.
PIC16C622A-20/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C622A-20/SS Applications
There are a lot of Microchip Technology PIC16C622A-20/SS Microcontroller applications.
- Teletext terminals
- Mice
- DDC control
- Food and beverage
- Air fryers
- Calculators
- Computer/laptop
- Blenders
- Hearing aids
- Dishwashers
