PIC16C622AT-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C622A |
| Pin Count | 18 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 128 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C622AT-20I/SO Overview
For space savings, it is available in the 18-SOIC (0.295, 7.50mm Width) package. In this case, it is mounted using the method of Surface Mount. In the package Tape & Reel (TR), it is included. The device has a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is OTP. A total of 13 I/Os are present. A component with the same part number as PIC16C622A can be compared to other similar components. At DUAL, it has its terminals. There are a total of 18 terminations in it. In the PIC? 16C series, this electrical component is found. Using the 5V supply voltage allows for high efficiency. Memory type EPROM is used for data storage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 18 pins are required to construct this device. It is mounted based on the method of Surface Mount. On it, there are 18 pins. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. The maximum supply current is set at 7mA. A 3.3/5V source of power is being used to run it. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5.5V's adaptability while employing it. 1 counters/timers are currently active. This part is part of the PIC family of CPUs. There is an oscillator type External used in this circuit.
PIC16C622AT-20I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C622AT-20I/SO Applications
There are a lot of Microchip Technology PIC16C622AT-20I/SO Microcontroller applications.
- Walkie talkies
- Auto-breaking system
- Blood pressure monitors
- Answering machines
- Multi-meter
- Food and beverage
- Nintendo
- Instrument control
- Toasters
- Hard drives
