PIC16C62A-20I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C62A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, USART |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.572mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C62A-20I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. A package of Tube contains it. The device has a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type OTP is used for program memory. There are 22 I/Os on it. Based on the PIC16C62A base part number, it can be compared with other components. DUAL is the position of its terminals on the board. This circuit consists of 28 terminationals. The electrical component is part of the series PIC? 16C. Because of the 5V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. On it, there are 28 pins. Microcontrollers contains this component. Using the devices' 3.5kB memory size, you can store programs and data. It is important to note that the maximum supply current is 20mA. There is 5V power source in this device. When working at a frequency of 20MHz it is able to achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. 3 timer/counters are present. PIC CPUs are included in this part. Using an oscillator type of External, it works.
PIC16C62A-20I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C62A-20I/SP Applications
There are a lot of Microchip Technology PIC16C62A-20I/SP Microcontroller applications.
- Paper shredders
- Radio
- Telephone sets
- Speed meter
- Virtual reality VR robots
- Microwave ovens
- Smartphone
- Process control devices
- Blenders
- Monitoring-temperature level, oil level, speed, distance, acceleration
