PIC16C63A-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C63A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 192 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C63A-20I/SO Overview
There is a 28-SOIC (0.295, 7.50mm Width) package available to save space. A Surface Mount mounting method is used. You can find it in the package of Tube. PIC core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. OTP is its program memory type. There are 22 I/Os on it, which makes it a very simple device. It has a part number of PIC16C63A that can be used to locate similar components. The terminals of this device are set to DUAL. It has 28 terminationals. PIC? 16C is the series number of this electrical component. The 5V supply voltage enables high efficiency. As a storage type for data, EPROM, OTP is used. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed using 28 pins. It is mounted based on the method of Surface Mount. On it, there are 28 pins. It falls under the category of Microcontrollers. Memory size for the devices is 7kB, which can be used to store programs and data. There is a source of power of 5V that powers this device. At a frequency of 20MHz, it exhibits excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. A total of 3 timers/counters have been set up. As part of the PIC CPU family, this component is included. There is an oscillator type External used in this circuit.
PIC16C63A-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C63A-20I/SO Applications
There are a lot of Microchip Technology PIC16C63A-20I/SO Microcontroller applications.
- Fabric
- Volt meter
- Vacuum cleaners
- Laminators
- Automatic control
- Paper shredders
- Teletext terminals
- Toys
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Blenders
