PIC16C63A-20I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16C63A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 192 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C63A-20I/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. In this case, it is mounted using the method of Through Hole. Tube is the package that contains it. The device has a PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. OTP is the type of program memory used by it. A total of 22 I/Os are present. A comparable component can be found by using the base part number PIC16C63A. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. The PIC? 16C series contains this electrical component. Using the 5V supply voltage allows for high efficiency. As a storage type for data, EPROM, OTP is used. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 28 pins are required to construct this device. According to Through Hole, it is mounted. It has a total of 28 pins on it. This is a component included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 7kB. Power is provided by a 5V source. The system is highly efficient when working at a frequency of 20MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. The number of timers and counters is 3. It belongs to the PIC CPU family. An oscillator type External is required for it to work.
PIC16C63A-20I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C63A-20I/SP Applications
There are a lot of Microchip Technology PIC16C63A-20I/SP Microcontroller applications.
- Ipad
- Kindle
- Pacemakers (used to control abnormal heart rhythm)
- Switches
- Light sensing & controlling devices
- Hand-held metering systems
- Fire alarms
- Calculators
- Security systems
- Electronic jamming systems
