PIC16C63A-20I/SS
| Parameters | |
|---|---|
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C63A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 192 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.98mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
PIC16C63A-20I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. You can find it in the package of Tube. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of OTP. A total of 22 I/Os are available on this device. It has a part number of PIC16C63A that can be used to locate similar components. The position of the device is DUAL at terminal. This circuit consists of 28 terminationals. The electrical component is part of the series PIC? 16C. It is possible to achieve high efficiency with a 5V supply voltage. As far as data storage is concerned, EPROM is used as the memory type. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. The method of Surface Mount is used to mount it. It is equipped with 28 pins in total. Microcontrollers contains this component. Using the devices' 7kB memory size, you can store programs and data. In this case, 20mA represents the maximum current supply. Power comes from a source of 5V. It performs extremely well at a frequency of 20MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. 3 counters/timers are currently active. PIC CPUs are included in this part. Using a External oscillator type, it works well.
PIC16C63A-20I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C63A-20I/SS Applications
There are a lot of Microchip Technology PIC16C63A-20I/SS Microcontroller applications.
- Paper shredders
- Multi-meter
- Projector
- Blood pressure monitors
- Tape drives
- Industrial instrumentation devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Automatic control
- Walkie talkies
- Petrochemical
