PIC16C66-10I/SP
| Parameters | |
|---|---|
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 10MHz |
| Base Part Number | PIC16C66 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
PIC16C66-10I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. Mounted using Through Hole. In the package Tube, it is included. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of OTP. 22 I/Os have been provided by the device. A component with the same part number as PIC16C66 can be compared to other similar components. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 28 terminations present. The PIC? 16C series includes this electrical component. By using a 5V voltage supply, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 28 pins are used to construct it. There are 28 pins on it. This is a component included in Microcontrollers. A device with a memory size of 14kB can store programs and data. It is powered by a 5V?source. This device works well at 10MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are 3 timers/counters. This part is part of the PIC family of CPUs. Using an oscillator type of External, it works.
PIC16C66-10I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C66-10I/SP Applications
There are a lot of Microchip Technology PIC16C66-10I/SP Microcontroller applications.
- Smartphone
- Answering machines
- Traditional industrial transformation
- Fabric
- Oscilloscopes
- Entertainment products
- Fax machines
- Mice
- DCS control intelligent sensor
- Air fryers
