PIC16C67-10/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | PIC16C67 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.715mm |
| Length | 52.07mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C67-10/P Overview
For the purpose of saving space, it is available in the 40-DIP (0.600, 15.24mm) package. In this case, it is mounted using the method of Through Hole. A package of Tube contains it. Devices with PIC core processors are available. In order to work effectively, the temperature should be kept at 0°C~70°C TA. OTP is its program memory type. The device has 33 I/Os. Other components that are comparable to it have the base part number PIC16C67. DUAL is the position of its terminals on the board. 40 terminations are present in it. An electrical component such as this is included in the series PIC? 16C. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 40 pins. On it, there are 40 pins. It falls under the category of Microcontrollers. The devices have a maximum memory size of 14kB that can be used to store programs and data. Power is provided by a 5V source. It is highly efficient when it works at a frequency of 10MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. 3 counters/timers are currently active. It is a member of the PIC family of CPUs. An oscillator type External is required for it to work.
PIC16C67-10/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C67-10/P Applications
There are a lot of Microchip Technology PIC16C67-10/P Microcontroller applications.
- Automatic control
- Electronic jamming systems
- Computer/laptop
- Broadband technology, video and voice processing
- Fire detection & safety devices
- Projector
- X-ray
- Smart highways (navigation, traffic control, information monitoring and car service)
- Firewalls
- Virtual reality VR robots
