PIC16C67-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C67 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.715mm |
| Length | 52.07mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16C67-20I/P Overview
There is an option to purchase it in the 40-DIP (0.600, 15.24mm) package, which saves space. A Through Hole mounting method is used. There is a Tube package available for it. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is OTP. There are 33 I/Os on the board. To find equivalent components, use its PIC16C67 base part number. The position of the device is DUAL at terminal. A 40 termination is contained within it. The electrical component is part of the series PIC? 16C. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 40 pins are used to construct it. This device has a total of 40 pins. It falls under the category of Microcontrollers. Memory size for the devices is 14kB, which can be used to store programs and data. It should be noted that 20mA represents the maximum supply current. A 5V source is used for powering it. This device achieves excellent efficiency at frequencies of 20MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are currently 3 timers/counters set up on the system. It is one of the members of the CPU family PIC. The oscillator type External is used to operate the device.
PIC16C67-20I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C67-20I/P Applications
There are a lot of Microchip Technology PIC16C67-20I/P Microcontroller applications.
- Dishwashers
- Kindle
- Aerospace navigation systems
- Routers
- Christmas lights
- Fax machines
- PDAs, game consoles
- Smart highways (navigation, traffic control, information monitoring and car service)
- Safety -airbags, automatic braking system (ABS)
- Tape drives
