PIC16C717-I/P
| Parameters | |
|---|---|
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C717 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 256 x 8 |
| Memory Type | EEPROM, EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of Programmable I/O | 16 |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 3.68mm |
| Length | 22.99mm |
PIC16C717-I/P Overview
For the purpose of saving space, it is available in the 18-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. Package Tube contains it. The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is OTP. 15 I/Os can be found on it. It has a part number of PIC16C717 that can be used to locate similar components. At DUAL, it has its terminals. It consists of 18 terminationals. This electrical component is part of the PIC? 16C series. Because the supply voltage is 5V, high efficiency can be achieved. Storage of data is performed using memory type EEPROM, EPROM, OTP. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed with 18 pins. The method of Through Hole is used to mount it. There are 18 pins on it. The component is included in Microcontrollers. The devices have a maximum memory size of 3.5kB that can be used to store programs and data. A 5V source of power is being used to run it. The system is highly efficient when working at a frequency of 20MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. In total, there are 3 timers and counters. It belongs to the PIC CPU family. A chip with 16 programmable inputs/outputs is available. An oscillator type Internal is required for it to work.
PIC16C717-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C717-I/P Applications
There are a lot of Microchip Technology PIC16C717-I/P Microcontroller applications.
- Air fryers
- Blood pressure monitors
- Information appliances (networking of household appliances)
- Instrument control
- Hand-held metering systems
- Data acquisition and control
- Missile control
- Hard drives
- Telephone sets
- Switches
