PIC16C74B-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16C74B |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| Nominal Supply Current | 5mA |
| RAM Size | 192 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 4.06mm |
| Length | 52.45mm |
| Width | 14.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C74B-20I/P Overview
There is a 40-DIP (0.600, 15.24mm) package available to save space. The way of Through Hole is used to mount it. A package of Tube contains it. The device has a PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. OTP is the type of program memory used by it. The device has 33 I/Os. Based on the PIC16C74B base part number, it can be compared with other components. A DUAL position is assigned to its terminals. It has 40 terminationals. In the PIC? 16C series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 40 pins are required to construct this device. There are a total of 40 pins on it. Microcontrollers contains this component. The devices have a memory size of 7kB that can be used to store programs and data. A 5V power source powers it. At a frequency of 20MHz, it can achieve excellent efficiency. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 3 timers/counters are present. The part is a part of the PIC CPU family. External is the oscillator type it uses.
PIC16C74B-20I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C74B-20I/P Applications
There are a lot of Microchip Technology PIC16C74B-20I/P Microcontroller applications.
- Projector
- Volt meter
- Air fryers
- Printers
- DCS control intelligent sensor
- Playstation
- Light sensing & controlling devices
- Tape drives
- Radio
- Automatic staplers
