PIC16C76-10/SP
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 10MHz |
| Base Part Number | PIC16C76 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 5x8b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of PWM Channels | 2 |
PIC16C76-10/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. In the package Tube, it is included. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at 0°C~70°C TA. OTP is the type of program memory used by it. 22 I/Os are present on the device. Based on the PIC16C76 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? 16C series, including this one. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 28 pins used in the construction of this device. It is equipped with 28 pins in total. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. It is important to note that the maximum supply current is 5mA. A 5V source is used for powering it. It performs extremely well at a frequency of 10MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are 3 timers/counters. As part of the PIC CPU family, this component is included. There is an oscillator type External used in this circuit.
PIC16C76-10/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C76-10/SP Applications
There are a lot of Microchip Technology PIC16C76-10/SP Microcontroller applications.
- Accu-check
- Torpedo guidance
- Instrument control
- Television
- Heart rate monitors
- Hand-held metering systems
- Speed meter
- Refrigerators
- Missile control
- Mice
