PIC16C77-10/L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16C77 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C77-10/L Overview
It is available in the 44-LCC (J-Lead) package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. A package of Tube contains it. The device runs in PIC core processor. During work, the temperature should remain at 0°C~70°C TA. The type of memory it uses is OTP. A total of 33 I/Os are available on this device. It has a part number of PIC16C77 that can be used to locate similar components. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 44 terminations present. The PIC? 16C series includes this electrical component. As a result of the 5V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 44 pins are used in its construction. There are a total of 44 pins on it. In Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 14kB. The maximum supply current is 5mA. There is 5V power source in this device. This device works well at 10MHz frequency when it is operating at a high rate of efficiency. The supply voltage of 5V's adaptability can be fully utilised by designers. A total of 3 timers/counters are present. This part is part of the PIC family of CPUs. Using an oscillator type of External, it works.
PIC16C77-10/L Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16C77-10/L Applications
There are a lot of Microchip Technology PIC16C77-10/L Microcontroller applications.
- Entertainment products
- Petrochemical
- Computer/laptop
- Graphic terminals
- Smart highways (navigation, traffic control, information monitoring and car service)
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Tape drives
- Robotic prosthetic limbs
- Projectors
- Copiers
