PIC16C773-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16C773 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 256 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 6x12b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16C773-E/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. Using Through Hole, it is mounted. It is available in the Tube package. There is a PIC as core processor in this device. Work should be done at -40°C~125°C TA. OTP is the type of program memory used by it. It has a number of 22I/Os. Based on the PIC16C773 base part number, it can be compared with other components. The terminals are positioned at DUAL. This circuit consists of 28 terminationals. An electrical component such as this is included in the series PIC? 16C. As a result of the 5V supply voltage, high efficiency is possible. As a storage type for data, EPROM, OTP is used. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. The structure is composed of 28 pins. A method of mounting is used, which is Through Hole. 28 pins are on it in total. The component is included in Microcontrollers. Memory size for the devices is 7kB, which can be used to store programs and data. Powered by a 5V source. Working at a frequency of 20MHz results in excellent efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are currently 3 timers/counters set up on the system. It is one of the members of the CPU family PIC. Using an oscillator type External, it operates.
PIC16C773-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16C773-E/SP Applications
There are a lot of Microchip Technology PIC16C773-E/SP Microcontroller applications.
- Industrial instrumentation devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Oil and gas
- Virtual reality VR robots
- Hard drives
- Oscilloscopes
- Equipment control
- Electromechanical control
- Traditional industrial transformation
- Aerospace navigation systems
