PIC16F1508-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1508 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| Nominal Supply Current | 850μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1508-I/ML Overview
Due to its space-saving qualities, it is available in the 20-VFQFN Exposed Pad package. A Surface Mount mounting method is used. You can find it in the package of Tube. A PIC core processor powers the device. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. There are 17 I/Os on it, which makes it a very simple device. To find comparable components, use the PIC16F1508 base part number. The terminals are positioned at QUAD. As far as terminations are concerned, there are 20 terminations present. PIC? XLP? 16F is the series number of this electrical component. The 5V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed using 20 pins. It has a total of 20 pins on it. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 7kB. There is 2.5/5V power source in this device. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. The part is a part of the PIC CPU family. 18 is the number of programmable I/O. Normal operation requires a supply voltage (Vsup) above 2.5V. It works with an oscillator type Internal.
PIC16F1508-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1508-I/ML Applications
There are a lot of Microchip Technology PIC16F1508-I/ML Microcontroller applications.
- Hard drives
- Magnetic resonance imaging (MRI)
- Speed meter
- Safety -airbags, automatic braking system (ABS)
- Fabric
- Teletext terminals
- Set-top boxes
- Virtual reality VR robots
- Printers
- Vacuum cleaners
