PIC16F1508-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1508 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1508-I/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. There is a Tube package available for it. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 17 I/Os are present on the device. Other components that are comparable to it have the base part number PIC16F1508. DUAL is the location of its terminals. As far as terminations are concerned, there are 20 terminations present. This electrical component is part of the PIC? XLP? 16F series. The 5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 20 pins used in the construction of this device. Total number of pins is 20. This is a component included in Microcontrollers. Memory size for the devices is 7kB, which can be used to store programs and data. A 2.5/5V source of power is being used to run it. Working at a frequency of 20MHz results in excellent efficiency. 3 timers/counters are in use. The part is a part of the PIC CPU family. The number 18 represents the number of programmable I/O ports on the board. In order to maintain normal operation, Vsup must be above 2.5V. Using an oscillator type of Internal, it works.
PIC16F1508-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1508-I/SS Applications
There are a lot of Microchip Technology PIC16F1508-I/SS Microcontroller applications.
- Food and beverage
- DCS control intelligent sensor
- Speed meter
- Multi-meter
- Laminators
- Virtual reality VR robots
- Torpedo guidance
- DDC control
- Set-top boxes
- Mice
