PIC16F1509-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1509 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| Nominal Supply Current | 850μA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1509-I/ML Overview
As a result, it is available in the 20-VFQFN Exposed Pad package. Surface Mount is the way to mount it. Tube is the package that contains it. Device with PIC core processor issupported. Work should be done at -40°C~85°C TA. FLASH is its program memory type. A total of 17 I/Os are present. A component with the same part number as PIC16F1509 can be compared to other similar components. The terminals of this device are located at QUAD. In this case, there are 20 terminationals. This electrical component is part of the PIC? XLP? 16F series. It is possible to achieve high efficiency with a 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 20 pins are used to construct it. There are a total of 20 pins on it. This is a component included in Microcontrollers. A device with a memory size of 14kB can store programs and data. There is 2.5/5V power source in this device. The system is highly efficient when working at a frequency of 20MHz. A total of 3 timers/counters are present. PIC CPUs are included in this part. A chip with 18 programmable inputs/outputs is available. In order to maintain normal operation, Vsup must be above 2.5V. Using a Internal oscillator type, it works well.
PIC16F1509-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1509-I/ML Applications
There are a lot of Microchip Technology PIC16F1509-I/ML Microcontroller applications.
- Petrochemical
- Food and beverage
- Answering machines
- Walkie talkies
- Traditional industrial transformation
- Oscilloscopes
- 3D printers
- DDC control
- Entertainment products
- Fire detection & safety devices
